Description
The Arduino® Nicla Vision is a powerful microcontroller equipped with a 2MP color camera, with a tiny format, ready to perform image analysis and processing. In addition to the camera, it also has an integrated microphone, distance sensor, 6-axis smart motion sensor, WiFi connectivity, BLE and supports MicroPython.
In addition to all this, the Nicla Vision can also be powered by a battery and itself has a battery charging and charge measurement circuit.
KEY FEATURES:
● Microcontroller: The Nicla Vision has an STM32H747AII6, Dual ARM® Cortex® - M7 core up to 480 MHz + M4 core up to 240 MHz.
● Nicla form factor: The Nicla Vision has the smallest form factor (so far) from the Arduino family (22.86 x 22.86 mm).
● LSM6DSOXTR 6-axis IMU: allows you to obtain 3D gyroscopic data and 3D accelerations. It is also possible to do machine learning on the IMU itself, to detect gestures, thus relieving the computing load on the main processor.
● 2MP Camera: The card uses the GC2145, a 2MP color camera.
● Omnidirectional microphone: The MP34DT06JTR MEMS digital microphone is omnidirectional and works through a capacitive sensing element with a high signal-to-noise ratio.
● Distance sensor: ToF (Time Of Flight) type.
● Battery operation: The Nicla Vision is prepared to operate on a battery, with a connector, charging circuit and precise measurement of the Li-ion/LiPo battery charge (MAX17262REWL).
EXAMPLES OF USE:
- Video intercom;
- Detection of people and animals;
- Checking product labels on a production line;
- Vibration analysis in industrial machines.
- Only unlock doors for authorized personnel and only if they are using PPE correctly;
- Detection of thirsty crops and automatic switching on of irrigation (only when necessary).
- Interaction with systems using only hand gestures;
SPECIFICATIONS:
◾ Microcontroller: STM32H747AII6 Dual Arm® Cortex® M7/M4 IC
- 1x Arm® Cortex® M7 core up to 480 MHz
- 1x Arm® Cortex® M4 core up to 240 MHz
◾ Sensors:
- 2 MP color camera (GC2145)
- 6-axis IMU (LSM6DSOX)
- Distance/time of flight (ToF) sensor (VL53L1CBV0FY/1)
- Omnidirectional microphone (MP34DT05)
◾ I/O:
- 1 I2C bus (with ESLOV connector)
- JTAG pin connectors
- Power and GPIO
- 1 x serial port
- 1x SPI
- 2x ADC
- Programmable I/O voltage from 1.8-3.3V
- 1 RGB LED (I2C)
◾ Power:
- Micro USB
- Pin Header VIN (5V)
- Connector for 3.7V Li-ion/Li-Po battery
◾ USB: high-speed micro-USB (USB-B) (480Mbps) with debug
◾ Memory:
- 2 MB Flash
- 1 MB RAM
- 16 MB QSPI Flash for storage
◾ Security: NXP SE050C2 encryption chip
◾ Connectivity:
- Wi-Fi 11b/g/n
- Bluetooth® Low Energy 4.2
◾ Operating temperature: -20°C to +70° L
◾ Dimensions: 22.86 mm x 22.86 mm
